Extension of the DW 958 provincial road as “G” class road, one-way road, 2-pass road, reinforcement of road embankments, reconstruction of culverts, reconstruction of engineering facilities on watercourses crossing with DW 958, construction/expansion of road drainage. The total length of the sections covered by the extension is 23.406 km. Basic technical parameters of the road after reconstruction: — technical class: G – design speed of 50 km/h (built area); 60 km/h (unbuilt area) – load: 115 kN/axis – movement category: KR3 – lane width: 3,50 m at the curb; — width of the road: lane width for vehicles turning left: 3,5 m; — width of walking – bicycle pavement with asphalt concrete surface 3.0 m – pavement width 2.0 m – double-sided groundsides width 1.25 m or greater, if necessary to locate BRD equipment – drainage along with drainage to receivers The road should be designed with an existing footprint taking into account the road runway and the existing development of the road lane and adjacent area. The route covered by the project should coincide with the axis of the existing road. Horizontal arcs will be regulated in the situation plan. Parameters of engineering objects: — load class ‘A’ – road class within the object: G – width of the road: 7.0-8.0 m – width of the pavement: 2.0 m, Superstandard solutions to increase safety: — thick, chemical-curing horizontal markings; — additional marking with retro-reflecting elements on the surface; — vibroacous edgelines; — illuminated C-9 traffic signs on islands and asylums; — additional lighting for pedestrians with hybrid power, using energy-saving devices (LED) – a deterrent marking.