The object of the contract is to design, obtain legal decisions and permits for the construction and construction of the Tuchów ring road within voivodship road No. 977 as a class G road, one-way road with 2 lanes, with a length of approx. It’s 2,7 miles. Characteristic parameters of the design bypass: road class: G design speed: outside the area of construction 70 kmh, in the area of 50 kmh. traffic category: KR4 permissible surface loads: 115 kc Vertical gauge min. 4,60 m cross section of the main road: width of the road: 7,0 m 2 x 3,5 m; single-way, road, semi-street width of the side: 1,25 m or more, if necessary to locate BRD equipment, inclination of gradients and trapezoidal ditches counters: 1:1,5, on the section where the road will serve as flood protection 1:2; parameters in the scope of intersection geometry: crossroad with voivodeship road No. 977 beginning of the three-intake roundabout with an external diameter of 40.0 m, min. width of roundabout: 5.0 m, intersection of the ring road with district road no. 1385K three-way roundabout with an external diameter min. 40.0 m, min. width of the roundabout: 5.0 m, crossroad with voivodeship road No. 977 approx. km 2640 three-intake roundabout with an external diameter of 40.0 m, min. width of roundabout: 5,0 m; Service routes: road class: D Road width min. 4,0 m bypass width: 0,75 m or more, if necessary, the BRD equipment used to improve safety in road traffic, pedestrians and cyclists standard and above standard: coarse-layer marking, chemical-curing structural lines on the edges of the road, point elements retro-reflecting roads service roads integration cube at pedestrian crossings reduced curb at pedestrian crossingsDetailed project characteristics are described in point. Q.